Headline

Aerospace Engineer | M.Tech in Turbomachines | Gas Turbine Engineering | CFD & Combustion | ANSYS Fluent | Structural Analysis & CAD

About

I am an Aerospace Engineer with an M.Tech in Turbomachines from SVNIT Surat and a B.Tech in Aerospace Engineering. My experience spans gas turbine engineering, mechanical design, and engineering documentation, complemented by postgraduate research in computational fluid dynamics (CFD) and combustion. Technical Expertise • Gas Turbine Engineering and Turbomachinery • Computational Fluid Dynamics (CFD) and ANSYS Fluent • Combustion Modelling and Flame Stability Analysis • Mechanical Design and 3D CAD Modelling • Structural Analysis and Technical Documentation • Engineering Design Optimisation and Cost Reduction Professional Experience I have worked on engineering activities related to Rolls-Royce Trent engine repair documentation and gained mechanical design experience during an internship at Caterpillar, contributing to gas turbine water-wash system design and cost optimisation. Research Experience My M.Tech research involved the numerical investigation of non-premixed methane–air flames in a bluff-body-stabilised combustor. I performed steady-state and transient CFD simulations, comparing turbulence-modelling approaches to investigate flame behaviour and near-blow-off conditions. I am interested in opportunities in aerospace design engineering, gas turbine engineering, propulsion, CFD, and structural analysis, where I can apply my technical knowledge to practical engineering challenges and continue developing as an engineer.

Location

Kalyan Dombivli

AI stack

Canva Magic Studio

ChatGPT

Microsoft Copilot

Work experience

Engineering Analyst at Infosys, Jul 2026 - Present · 4 mos, Bengaluru, Working as Technical Author for the Rolls-Royce PLC Technical Variance Repair team.

College Intern at Caterpillar Inc., Jun 2025 - Apr 2026 · 11 mos, Bengaluru, Worked for Solar Turbines' (a subsidiary of Caterpillar Inc.) Mechanical Design Team Supported for Cost Optimization projects. Lead the project for Water Wash System for Gas Turbine Engines

Student Intern at Jet Aerospace Aviation Research Center, Jul 2023 - Aug 2023 · 2 mos, Palakkadu, Kerala, India, I worked as a Student Intern at Jet Aerospace Space Research Center. I and my team of 4 members designed and developed two UAV's of STOL type and developed codes for various sensors attached to a 1U Nano Satellite using the Arduino CC software. We also attended a 2-Day workshop on development of Quadcopter Drones and also developed one. We also got an opportunity to learn briefly about airport management and air marshalling techniques.

Student Intern at Space Technology and Aeronautical Rocketry, Jun 2022 - Jul 2022 · 2 mos, Surat, Gujarat, India, I worked as a Mechanical Design Intern at Space Technology and Aeronautical Rocketry (STAR) from 28th June 2022 to 28th July 2022 under their Virtual Training and Internship Program(VTIP). I worked in a team on Design & Simulation of Static Test Pad for Solid Rocket Motor. We worked in a virtual mode and successfully designed the Static Test Stand for testing of solid rocket motors of class F to K on the Fusion 360 with the required specifications and the simulations. Along with that, I also learned the software like Proteus, Autodesk Eagle and Arduino IDE in our initial training phase. Next, was the task of Design & Simulation of High Powered Rocket which would employ a non-pyro technique for the recovery system of the Rocket. We designed a High Powered Rocket that would be propelled by Estes F-15 motor. The simulations for the mechanical design were performed using the Open Rocket software and the Rocket and Non-pyro technique design was done using Fusion 360.

Education

Master of Technology - MTech, Turbo Machines, Sardar Vallabhbhai National Institute of Technology (SVNIT), Surat

Bachelor of Technology - BTech, Aerospace Engineering, Amity University Mumbai