Suhel Mulla profile photo 1 on Tal

Suhel Mulla

.

Hubli-Dharwad

2+ years of work experience

Aequs HDC
Apr 20251 yr 3 mosPresent

Karnataka, India

• Quality Trainee with practical exposure to QMS,. • Performed in-process dimension Inspection of components as per engineering drawings. • Interpreted GD&T, tolerances, and dimensional requirements. • Recorded Inspection results and supported defect analysis, root cause identification, and corrective action support. • Worked closely with production and Engineering teams to ensure Dimensional accuracy and compliance • Collaborative team player with shop-floor coordination experience.
Aequs HDC
Apr 20251 yr 3 mosPresent

Quality Trainee with practical exposure to QMS. In-process quality inspection like dimensioning, Cosmetic, TPG etc. Familiar with the engineering drawings, GD&T, Quality tools for failure analysis and development. Contributed to process improvement initiatives by identifying minor defects and suggesting corrective actions. Supported the coordination between design, production, and quality teams for smooth project execution.
Aequs HDC
Apr 20251 yr 3 mosPresent

Applied GD&T and dimensional tolerance analysis to validate machined/fabricated components — bridging design intent with manufacturing reality, a core DFM/DFA skill. Interpreted complex multi-view engineering drawings including section views, positional tolerances, and surface finish callouts; identified and resolved drawing ambiguities with the design team. Performed fit and clearance checks on assembled components, informing tolerance stack-up decisions and feeding back design change recommendations. Collaborated cross-functionally with Design, Production, and Quality teams to close corrective actions and implement design modifications under tight production schedules. Maintained structured QMS documentation — inspection reports, NCRs, and quality records — reinforcing disciplined engineering documentation practices.
Nano Machines Pvt. Ltd.
Aug 20245 mosDec 2024

Led 3D product modelling and 2D detailed drawing creation for NPD programmes — producing fully constrained SolidWorks assemblies and GD&T-annotated component drawings from concept briefs. Designed machine components including structural frames, mounting brackets, and drive mechanisms; participated in design reviews and iterated models based on stakeholder feedback. Built and tested mechanical prototypes, validating dimensional accuracy, assembly fit, and functional performance — gaining hands-on product development cycle experience. Prepared structured BOMs and design documentation packages to enable seamless handover to production. Applied DFM principles throughout design — selecting materials and geometries to simplify fabrication and reduce component count.
3 Axis Engineer Service Pvt. Ltd.
Sep 20233 mosNov 2023

Created detailed 3D solid models and fully-toleranced 2D manufacturing drawings for mechanical sub-assemblies using SolidWorks. Developed fabrication drawings with weld symbols, fastener specifications, and surface treatment callouts for production teams. Gained direct exposure to modular aluminium profile enclosure systems — analogous to the structural chassis and enclosure design skills required for iPhone hardware. Applied GD&T and tolerance analysis to all deliverables, ensuring manufacturing accuracy and part interchangeability.
3 Axis Engineering Service Private Limited
Aug 20233 mosOct 2023

Hubli, Karnataka, India

• Gained hands-on experience in HyperMesh for automotive component meshing and preprocessing. • Created high-quality 2D & 3D meshes for automobile parts following industry standards. • Worked on real-time projects involving Mercedes-Benz and BMW components. • Applied CAD principles, design specifications, and dimensioning techniques in engineering models. • Collaborated with senior engineers to improve mesh quality, element flow, and accuracy. • Ensured models met CAE and simulation-ready standards.

Education

KLE Institute of Technology, HUBLI

Bachelor of Engineering - BE, Mechanical Engineering

KLE Institute of Technology, HUBLI

20222 yrs2024

Diploma in polytechnic, Mechanical Engineering

Anjuman polytechnic hubli

20192 yrs2021

Join Suhel and 10k+ other professionals on

Tal Boss

Tal is the app where bosses meet engineers & builders directly, without middlemen

Download Tal Boss

Suhel Mulla on Tal

Headline

.

About

Mechanical Engineering graduate and Quality Assurance Engineer Trainee at Aequs Hubballi with hands-on experience in GD&T, dimensional inspection, QMS, and CAE pre-processing. Skilled in interpreting engineering drawings, performing in-process inspections, and supporting defect analysis and corrective actions.

Location

Hubli-Dharwad

Work experience

Quality Assurance Trainee at Aequs HDC, Apr 2025 - Present · 1 yr 3 mos, Karnataka, India, • Quality Trainee with practical exposure to QMS,. • Performed in-process dimension Inspection of components as per engineering drawings. • Interpreted GD&T, tolerances, and dimensional requirements. • Recorded Inspection results and supported defect analysis, root cause identification, and corrective action support. • Worked closely with production and Engineering teams to ensure Dimensional accuracy and compliance • Collaborative team player with shop-floor coordination experience.

Quality Assurance Trainee at Aequs HDC, Apr 2025 - Present · 1 yr 3 mos, Quality Trainee with practical exposure to QMS. In-process quality inspection like dimensioning, Cosmetic, TPG etc. Familiar with the engineering drawings, GD&T, Quality tools for failure analysis and development. Contributed to process improvement initiatives by identifying minor defects and suggesting corrective actions. Supported the coordination between design, production, and quality teams for smooth project execution.

Design Assurance Engineer at Aequs HDC, Apr 2025 - Present · 1 yr 3 mos, Applied GD&T and dimensional tolerance analysis to validate machined/fabricated components — bridging design intent with manufacturing reality, a core DFM/DFA skill. Interpreted complex multi-view engineering drawings including section views, positional tolerances, and surface finish callouts; identified and resolved drawing ambiguities with the design team. Performed fit and clearance checks on assembled components, informing tolerance stack-up decisions and feeding back design change recommendations. Collaborated cross-functionally with Design, Production, and Quality teams to close corrective actions and implement design modifications under tight production schedules. Maintained structured QMS documentation — inspection reports, NCRs, and quality records — reinforcing disciplined engineering documentation practices.

Product Design Intern at Nano Machines Pvt. Ltd., Aug 2024 - Dec 2024 · 5 mos, Led 3D product modelling and 2D detailed drawing creation for NPD programmes — producing fully constrained SolidWorks assemblies and GD&T-annotated component drawings from concept briefs. Designed machine components including structural frames, mounting brackets, and drive mechanisms; participated in design reviews and iterated models based on stakeholder feedback. Built and tested mechanical prototypes, validating dimensional accuracy, assembly fit, and functional performance — gaining hands-on product development cycle experience. Prepared structured BOMs and design documentation packages to enable seamless handover to production. Applied DFM principles throughout design — selecting materials and geometries to simplify fabrication and reduce component count.

Mechanical Specialist at 3 Axis Engineer Service Pvt. Ltd., Sep 2023 - Nov 2023 · 3 mos, Created detailed 3D solid models and fully-toleranced 2D manufacturing drawings for mechanical sub-assemblies using SolidWorks. Developed fabrication drawings with weld symbols, fastener specifications, and surface treatment callouts for production teams. Gained direct exposure to modular aluminium profile enclosure systems — analogous to the structural chassis and enclosure design skills required for iPhone hardware. Applied GD&T and tolerance analysis to all deliverables, ensuring manufacturing accuracy and part interchangeability.

Summer Intern at 3 Axis Engineering Service Private Limited, Aug 2023 - Oct 2023 · 3 mos, Hubli, Karnataka, India, • Gained hands-on experience in HyperMesh for automotive component meshing and preprocessing. • Created high-quality 2D & 3D meshes for automobile parts following industry standards. • Worked on real-time projects involving Mercedes-Benz and BMW components. • Applied CAD principles, design specifications, and dimensioning techniques in engineering models. • Collaborated with senior engineers to improve mesh quality, element flow, and accuracy. • Ensured models met CAE and simulation-ready standards.

Education

Bachelor of Engineering - BE, Mechanical Engineering, KLE Institute of Technology, HUBLI

Diploma in polytechnic, Mechanical Engineering, Anjuman polytechnic hubli