Headline

NPD Quality,Machining QAD, PDC QA, | BTech in Electrical Engineering | Passionate about Product Quality, Root Cause Analysis & Process Improvement

About

I’m an Electrical Engineer currently working as a Quality Engineer at ASK Automobiles Ltd., with experience in quality assurance, die casting, machining processes, product inspection, and manufacturing quality systems. Previously, I worked as a Quality Engineer (Trainee) in New Product Development at TVS Sundaram Clayton, where I gained hands-on experience in product validation, PPAP, APQP, PFMEA, PFC, QCPC, CMM inspection, gauge validation, and root cause analysis. I contributed to 20+ PPAPs and supported process improvements that helped reduce machining-related defects by 15%. At ASK Automobiles, I am further developing my expertise in die-casting and machining quality, process monitoring, defect analysis, inspection methods, and continuous improvement, with a focus on identifying root causes and improving product and process quality. My technical strengths include CMM report interpretation, attribute & variable gauge validation, 8D problem-solving, rejection Pareto analysis, root cause analysis, process improvement, and quality inspection. During my B.Tech, I led the development of an Air Pollution Monitoring Drone using ESP32 and GPS modules for real-time air quality monitoring. The project achieved a podium finish at the BPUT State-Level Drone Competition, reflecting my interest in automation, embedded systems, and engineering innovation. Tools & Skills: SAP | Minitab | AutoCAD | PFMEA | PPAP | APQP | 8D | CMM | Root Cause Analysis | Pareto Analysis | Gauge Validation | Die Casting | Machining | Quality Inspection | Process Improvement I’m passionate about continuous learning, advanced manufacturing, quality improvement, automation, and engineering innovation, and I’m always looking for opportunities to learn, solve challenging problems, and create measurable improvements in manufacturing.

Location

Bengaluru

AI stack

openai

Work experience

Quality Assurance Analyst at ASK AUTOMOTIVE LIMITED, Nov 2025 - Present · 1 yr, Malur, Karnataka, India

Quality Engineer (Trainee) - New Product Development at Sundaram Clayton Limited, Jun 2024 - Nov 2025 · 1 yr 6 mos, Chennai, Tamil Nadu, India, • Supported the completion of over 5 PPAP submissions across multiple NPD projects, ensuring compliance with APQP standards. • Reviewed and prepared key quality documents such as PFMEA, PFC, and QCPC to enhance process clarity and reduce deviation risks. • Identified and corrected machining defects by adjusting process parameters, resulting in a 15% reduction in excess milling rejections. • Interpreted 3D scan and CMM reports to verify dimensional accuracy, ensuring product conformance to technical drawings. • Reduced defect turnaround time by 20% through proactive inspection and improved communication between production and quality teams. • Validated quality inspection gauges (air plug, snap, position), enhancing inspection accuracy and consistency. • Created and analyzed Rejection Pareto charts to identify key defect contributors and guide corrective actions. • Assisted in customer and supplier coordination to address technical queries and ensure on-time quality deliverables.

Education

Bachelor of Technology - BTech, Electrical engeenering, Biju Patnaik University of Technology, Odisha