Mohan chand profile photo 1 on Tal

Mohan chand

Ex-Quality officer| TATA Advanced Systems Limited | Aerospace engine components | Ex- Stellantis | GD&T | CMM | Zeiss | AS9100D | Ex Bajaj auto mobile pvt.ltd. 4 years experience.

Hyderabad

4+ years of work experience

TATA Advanced Systems Limited
Jul 20241 yr 7 mosJan 2026

Hyderabad, Telangana, India

TATA Advanced Systems Limited
Jul 20241 yr 7 mosJan 2026

Tata Advanced Systems Ltd. (TASL)
Jul 20241 yr 7 mosJan 2026

• Conduct FAI/PFAI inspections for aerospace engine components as per AS9102. • Operate Zeiss CMM and perform complete dimensional verification. • Interpret drawings, models, and GD&T for inspection planning. • Analyze data, document deviations, and prepare inspection reports. • Support MRB activities for NC parts. • Maintain compliance with AS9100D, AS13100, ISO 9001. • Coordinate with engineering/production for corrective actions.
PSA AVTEC Powertrain Pvt. Ltd.
Dec 20221 yr 7 mosJun 2024

PSA AVTEC Powertrain Pvt. Ltd.
Dec 20221 yr 7 mosJun 2024

• Performed incoming, in-process, and final inspections. • Conducted CMM-based measurements. • Ensured calibration and upkeep of quality gauges. • Prepared NCR and inspection reports using SAP. • Conducted root cause analysis and rejection monitoring. • Maintained POKA-YOKE, 5S, and quality standards.
Bajaj Auto Ltd
Jul 20211 yr 1 moJul 2022

Uttarakhand, India

Bajaj Auto Ltd
Jul 20211 yr 1 moJul 2022

• Conducted line inspections and maintained QC documentation. • Performed rejection analysis and implemented corrective actions. • Supported POKA-YOKE and 5S improvement activities.

Education

Diploma, Mechanical Engineering

Bhagirathi institute of technology and management

20182 yrs2020

High School Diploma, Mechanical Engineering

BITM Polytechnic S.k.

20182 yrs2020

Join Mohan and 10k+ other professionals on

Tal Boss

Tal is the app where bosses meet engineers & builders directly, without middlemen

Download Tal Boss

Mohan chand on Tal

Headline

Ex-Quality officer| TATA Advanced Systems Limited | Aerospace engine components | Ex- Stellantis | GD&T | CMM | Zeiss | AS9100D | Ex Bajaj auto mobile pvt.ltd. 4 years experience.

About

TATA Advanced Systems enabled contributions to quality and assembly processes, leveraging GD&T expertise and documentation skills. As a Quality Officer, supported the Tata Centre of Excellence in advancing aerospace engine standards. Education in Mechanical Engineering from BITM Polytechnic laid a strong foundation for problem-solving and process optimization. Motivated to enhance operational efficiency by applying MES knowledge and technical acumen to quality assurance initiatives.

Location

Hyderabad

Work experience

Quality Officer at TATA Advanced Systems Limited, Jul 2024 - Jan 2026 · 1 yr 7 mos, Hyderabad, Telangana, India

Tata center of excellence (TCOE) Tata advance system ltd at TATA Advanced Systems Limited, Jul 2024 - Jan 2026 · 1 yr 7 mos

Quality Officer at Tata Advanced Systems Ltd. (TASL), Jul 2024 - Jan 2026 · 1 yr 7 mos, • Conduct FAI/PFAI inspections for aerospace engine components as per AS9102. • Operate Zeiss CMM and perform complete dimensional verification. • Interpret drawings, models, and GD&T for inspection planning. • Analyze data, document deviations, and prepare inspection reports. • Support MRB activities for NC parts. • Maintain compliance with AS9100D, AS13100, ISO 9001. • Coordinate with engineering/production for corrective actions.

Quality inspector Assistant at PSA AVTEC Powertrain Pvt. Ltd., Dec 2022 - Jun 2024 · 1 yr 7 mos

Quality Inspector at PSA AVTEC Powertrain Pvt. Ltd., Dec 2022 - Jun 2024 · 1 yr 7 mos, • Performed incoming, in-process, and final inspections. • Conducted CMM-based measurements. • Ensured calibration and upkeep of quality gauges. • Prepared NCR and inspection reports using SAP. • Conducted root cause analysis and rejection monitoring. • Maintained POKA-YOKE, 5S, and quality standards.

Apprentice at Bajaj Auto Ltd, Jul 2021 - Jul 2022 · 1 yr 1 mo, Uttarakhand, India

Engineer Intern at Bajaj Auto Ltd, Jul 2021 - Jul 2022 · 1 yr 1 mo, • Conducted line inspections and maintained QC documentation. • Performed rejection analysis and implemented corrective actions. • Supported POKA-YOKE and 5S improvement activities.

Education

Diploma, Mechanical Engineering, Bhagirathi institute of technology and management

High School Diploma, Mechanical Engineering, BITM Polytechnic S.k.

Mohan chand - Quality Officer in Hyderabad | Tal